Kurzweil Forte SE - Terminology

Terminology
4-1
Chapter 4
Terminology
is chapter provides denitions and descriptions for all of the Forte SE-specic terms used
in this manual. Some of the terms are also used by other manufacturers.
Since there are no standard denitions for some of these terms, they are described here to
avoid confusion. All of these terms appear with the rst letter capitalized as proper nouns in
this manual to make it easy to distinguish between the generic term and the Forte SE specic
term.
In addition to the terms below, and to avoid confusion, any Forte SE specic feature,
connector or control will have the rst letter capitalized to distinguish it from the generic
term.
Program
A Program is an instrument sound that plays on a MIDI
channel. e sound of each Program can be modied by
parameters that are assigned to the controllers (Sliders,
Switch buttons, Mod Wheel, and Pedals).
See Program Mode on page 6-1 for more information on
Programs.
Multi
A Multi allows up to 8 instrument sounds (Programs) to
be played from the keyboard at once. A Multi has up to 8
Zones, each with its own keyboard range, Program, MIDI
channel, and controller assignments.
See Ch. 10 Multi Mode, on page 10-1 for more
information on Multis.
KB3
Kurzweil’s organ modelling simulation of the original
Hammond B3 with Leslie rotary speaker emulation.