Kurzweil Forte SE - Page 326

System Mode
System Utilities
14-11
Format Flash
CAUTION: THIS OPERATION ERASES THE OPERATING SYSTEM, ALL
FACTORY OBJECTS AND ALL USER OBJECTS.
Performing this operation will format the Forte SE’s system ash memory and erase the OS
software as well as all Objects. Do not do this unless you think it is necessary in order to
improve the performance of your Forte SE. Should you decide to do so, be sure to back up
all of your les and software. After you do this, System Mode will still be available, so you
can run updates and get your Forte SE up-and-running again. After a Format the unit will
come up in System Mode by default.
Caution: Before formatting, back up your user objects (Programs/Multis
etc.) by storing them to an external device in Global Mode.
To perform a Format, follow these steps:
1. Follow the instructions specied on page 14-1 to enter System Mode.
2. Select System Utilities.
FORTE SE System Mode v.3.44.25695
Run
Forte
System
Update
Run
Diags
System
Reset
System
Utilities