Kurzweil Forte SE - Page 56

Program Mode
Selecting Programs
6-4
The Display
In Program Mode, the top line of the display shows the current Mode, MIDI transposition,
and MIDI Channel. e Program ID number and name are displayed in the center of the
display. e current Bank and Category are displayed above the program ID and name.
When a controller is moved, the controller assignment and value is briey displayed below
the program ID and name. e Soft buttons are displayed along the bottom line.
Changing View
e View soft button will toggle the display and allow you to see available Programs as a list.
Buttons and controllers will behave as usual. When a controller is moved, the controller
name, assignment and value is briey displayed in the box at left of the screen. KB3
information is also shown if a KB3 program is selected in any MIDI channel:
Pop Up Messages
Some actions cause the display to show pop up messages. After a short time the display
returns to show the current Program.