Program Mode
Selecting Programs
6-6
Category & Program/Multi Buttons
e Category buttons allow you to select Programs by instrument type simply by pressing a
button. You can select one Category button at a time and the current Category button’s LED
is lit.
Each Category contains 16 Programs of a single instrument type. First select the Category
you want, then select one of the 16 Programs by pressing any of the Program/Multi buttons
numbered from 1 to 16.
You can also press one of the instrument Category buttons, then turn the Alpha Wheel
clockwise or press the Next button to advance to the next Program in the Category. When
you reach the end of a Category, the Forte SE automatically advances to the beginning of the
next Category. is will also work in reverse if you turn the Alpha Wheel counter-clockwise
or press the Previous button. In this case when you reach the beginning of a Category, Forte
SE automatically advances to the end of the previous Category. e 16 User Categories come
after the factory ones, but only non-empty programs can be selected this way.
Choosing Category Default Programs
You can choose a “Category default program” from each Category that will be recalled each
time you press that Category’s button. To save a Category default program, rst select a
Program using any Program select method (Alpha wheel, Previous-/Next+ buttons, Category
buttons, Program/Multi buttons). A Category button for the current Category will have a
lit LED. Next, press and hold the currently lit Category button until the display shows the
message “Category default program saved.” e Category default program has now been
successfully saved.
To Next Page
Loading...
