Kurzweil Forte SE - Page 78

Program Edit Mode
Editing VAST Programs
7-9
VAST Sources and the Parameters Page
When assigning a physical controller or CC number to a source eld, a Parameter is
automatically added to the Parameters Page with the name of the rst assigned VAST
parameter.
If you are assigning a physical controller or CC number that is already used by a parameter
on the Parameters Page, a new parameter will not be added to the Parameters Page. e
new assignment will share the existing Parameter on the Parameters Page (Name, Control
assignment and initial Value). e previously existing Parameter’s name will not change based
on the new assignment. If you have assigned one physical controller/MIDI CC to multiple
VAST parameters, you may wish to edit the Parameter name to reect this. For details on
renaming a Parameter see The Parameter Edit Page on page 7-13.
When a VAST Mod source has been assigned to a physical controller or CC number, there
will be an associated parameter on the Parameters Page (unless it has been manually deleted
from the Parameters Page). To quickly nd the associated parameter, select the VAST
source eld and press the Edit button to jump to selecting the associated parameter on
the Parameters Page. When a VAST parameter source is selected which has an associated
parameter on the Parameters Page, the top bar of the page will show the Parameter symbol.
PARAMETER Symbol
Relationship Between Controller Assignments on the
Parameters Page and the VAST Pages
By default, when a new parameter is automatically added to the Parameters Page, the physical
controller or CC number in the Control column will be the same CC number that was
selected as a VAST source. If you select a dierent physical controller or CC number in the
Control column of the Parameters page, that physical controller or CC number will now
control the VAST parameter, though the CC number that was originally selected as a VAST
source will not change. For example, if you make your original VAST source assignment with
MIDI 12 (aka Slider A), but then change Slider A to Slider B on the Parameters Page, Slider
B will now control the VAST assignment, but the original VAST source will still show MIDI
12.