Kurzweil K2000 - MUSICIANS GUIDE - Page 102

Effects Mode and the Effects Editor
Configurations and Parameters
9-20
Flange, Delay, Room Reverb, and Mixer
EditEffect|||||<>Config:Fla+Dly+Room+Mix
FlaDly:0m|DlyDryIn:9|||RevDryIn:9||FR:1|
LFOSpd:64|DlyFlaIn:0|||RevFlaIn:9||FL:1|
LFODep:98|DlyTime|:9ms|RevDlyIn:0||DR:1|
FeedBk:90|Feedback:90%|RvPreDly:0||DL:1|
|||||||||||||||||||||||HFrqDamp:WrmRR:1|
DryLvl:0|||||||||||||||Rev|Time:1.0RL:1|
Name|||Save|||Delete|Dump|||||||||||||||
PARAMETER RANGE OF VALUES
FLANGE DELAY 0 to 60 milliseconds
FLANGE LFO SPEED 0 to 65
FLANGE LFO DEPTH 0 to 99
FLANGE FEEDBACK 0 to 99%
DRY LEVEL 0 to 10
DELAY DRY IN 0 to 10
DELAY FLANGE IN 0 to 10
DELAY TIME 0 to 750 milliseconds
DELAY FEEDBACK 0 to 99%
REVERB DRY IN 0 to 10
REVERB FLANGE IN 0 to 10
REVERB DELAY IN 0 to 10
REVERB PRE-DELAY 0 to 60 milliseconds
HIGH FREQUENCY DAMPING Warm, Soft, Bright
REVERB TIME (DECAY) 100 milliseconds to 1.2 seconds
FLANGE LEVEL RIGHT—LEFT 0 to 10
DELAY LEVEL RIGHT—LEFT 0 to 10
REVERB LEVEL RIGHT—LEFT 0 to 10