Song Mode
Edit Song: TRACK Page
12-32
Common Parameters for Edit Song: Track Functions
Locate
This parameter is available in every TRACK edit function.
The Locate Bar and Beat will change in real time during play back and recording to reßect the
SongÕs current position. It can be set to any Bar and Beat, including negative values. Play back
begins at, and Stop resets the Song to the Locate Bar and Beat.
Region / Criteria Window Parameters
From and To
From and To are available in most TRACK edit functions to deÞne a range of time on the
selected track(s).
The From value deÞnes the Þrst Bar and Beat in a range of time selected for editing. Although
From is always expressed in Bars and Beats, and will be aligned exactly on the Beat when adjust
manually, it is possible for From to represent a value with Þner resolution when a range of time
is deÞned in real time using the FromTo soft button.
The To value deÞnes the Final Bar and Beat in a range of time selected for editing. Although To
is always express in Bars and Beats, and will be aligned exactly on the Beat when adjust
manually, it is possible for the To value to represent a value with Þner resolution when a range
of time is deÞned in real time using the FromTo soft button.
Events
Any and all types of MIDI events are available for editing, selectable in this parameter. Some
events will provide you with settings for a range of values, or other MIDI event speciÞc criteria.
Available Values are: All, Notes, Controllers, MonoPress, PitchBend, ProgChange, PolyPress,
SysEx, and Tempo
When Events is set to: All
All MIDI events on the track(s) you are editing, that occur in the region of time between the
From and To settings, will be affected by the edit function.
When Events is set to: Notes
Note Number and Key Velocity ranges can be set for Note events.
LoKey
Determines the lowest note in a range of notes to be affected. This can be set to any MIDI note
value; the default is C-1.
Hi(Key)
Determines the highest note in a range of notes to be affected. This can be set to any MIDI note
value; the default is G9.
LoVel
An attack velocity range can be speciÞed as criteria for selecting Note events for editing. The
LoVel parameter sets the lowest velocity a Note needs to have in order to be edited. Notes on
the selected track(s) with a attack velocities lower than the LoVel will not be affected by the
edit. The available values are 1 Ð 127; the default is 1.
To Next Page
Loading...
Need help?
General
