Disk Mode
Disk Mode Page
13-1
Chapter 13
Disk Mode
Disk mode lets you load and save Þles of objects between the K2vx and the outside world,
through the K2vxÕs ßoppy drive or SCSI ports. The ßoppy drive accepts MS-DOS format
double-sided double-density (DSDDÑ720K) and high-density (HDÑ1.4 M) ßoppy disks. It
will also accept single-sided double-density disks (SSDDÑ360K) if theyÕre formatted as
double-sided. To save data from the K2vx to a ßoppy disk, the disk must be formatted
(initialized) by the K2vx or by an IBM
Ò
-compatible computer running MS-DOS
Ò
software.
Most SCSI (Small Computer System Interface) devices will operate with the K2vx. The K2vxÕs
SCSI ports require 25-pin SCSI connectors. The most common use for the SCSI ports is to
connect a hard disk or chain of hard disks for storing samples and other objects. You can also
connect a CD-ROM drive for reading Þles to the K2vx. The K2vx will treat a CD-ROM drive
like any other SCSI device (except that you canÕt save Þles to it).
Disk Mode in the K2vx allows ßexibility to organize disk Þles and their contents. Many
powerful operations are included that can save a lot of time by allowing you to easily specify
exactly what you want to load or save. Examples of this range from organizing related Þles
into directories, to loading macro lists of Þles or selected objects from multiple SCSI drives, to
setting up programs to automatically link with samples off of a CD-ROM.
Lastly, the K2vx offers MS-DOS Þle system compatibility, sample transfer using the standard
audio Þle formats "AIFF" and "WAVE", and saving of song Þles as MIDI Type 0 format.
Disk Mode Page
To enter Disk mode, press the Disk button, and the Disk mode page will appear:
DiskMode||||Samples:65535K||Memory:747K|
Path|=|\DRUMS\||||||||||||||||||||||||||
(Macro|on)||
||||||||
||||||||||||||||||||
CurrentDisk:
SCSI|4||
||||||Startup:Off|||
||||||||||||||||||||||||||Library:Off|||
Direct|Access,|121MB||||||||||||||||||||
TAXMOR
|
XL3-10
0
1||||1
.
07||||
|
||||||
|
|||||
<more|
|
|Load|
|
|Save|
|
Macro|
|
Delete
|
more>
As usual, the current mode is displayed on the top line. At the middle of this line, the amount
of available sample RAM is shown (if you have added optional sample RAM; if you havenÕt,
this part of the top line will be blank). To the right of the top line you see the amount of memory
available for storing all other RAM objects. Straight from the box, this number should be
around 240K. If you have added the optional P/RAM extension kit, the number will be about
1260K. The P/RAM kit enables you to store hundreds of additional programs, songs, and any
other objects. If you do a lot of programming or sequencing, the P/RAM option is a good idea.
In the center of the page is a line indicating the currently selected device. Select different
devices using any data entry method. You can select the ßoppy drive, or SCSI IDs 0Ð7. (If you
connect an Apple Macintosh
Ò
personal computer, donÕt select SCSI ID 7, since thatÕs the SCSI
ID of the Mac, which canÕt be changed. All SCSI devices connected in a network must have
different SCSI IDs in order for the network to function). When you want to communicate with
any of the SCSI storage devices in your network, set the Current disk parameter to the value
To Next Page
Loading...