K2vx Compatibility
Converting K2000 Files to K2vx Files
Appendix B-2
Converting K2000 Files to K2vx Files
There are Þve steps to convert a K2vx Þle to a K2vx Þle:
Before you start, make sure you have saved all user objects to disk, because memory will be
cleared.
Step 1 Load the compatibility Þle as Everything/ Overwrite. (Everything/Merge mode will
work too)
Step 2 Load the Þle(s) you wish to port into any memory bank from 200 through 800.
Step 3 Save these objects with dependents to new Þles.
Step 4 Delete everything.
Step 5 Load the new Þles to make sure they play correctly.
Happy porting.
To Next Page
Loading...