Disk Mode
Macros
13-39
DiskMode||||Samples:12313K||Memory:102K|
Path|=|\CYBER\||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
CurrentDisk:SCSI|2||||||||Startup:Off|||
||||||||||||||||||||||||||Library:Off|||
Direct|Access,|84MB|||||||||||||||||||||
Psyquest|PS-427||||||||XMC1.7|||||||||||
<more|||Load|||Save||Macro||Delete|more>
The following screen is what you will see if Macro recording is Off:
Func:MACRO|||||[|Off||]||||||Index:|||0|
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
Select|Modify||Load||Record||On||||Exit|
The top line displays the disk function ,
Func:MACRO
the current Macro mode,
|[|Off||]||
and an index value into the Macro Table.
|Index:|||0|
Macro Modes
The K2vx has 3 Macro modes -- Record, Pause, and Off. The meaning of each of these modes
is:
Off There is no Macro object in the K2vx memory.
Record A Macro object exists, and the K2vx records any Þle load operations that occur.
Pause A Macro object exists, but the K2vx does not record any Þle load operations that occur.
Note that whenever the Macro mode is Off, there are two soft buttons labeled Record and On.
Pressing On will enable Macro Record mode, and then will return to the Disk Mode page. As
an alternative, pressing Record will also enable Macro Record mode, but the display will
remain on the Macro page. Once you press Record, the soft buttons and the top line of the
display will change. The screen will look like this:
To Next Page
Loading...
Need help?
General
