Song Mode
MAIN Page
12-11
MAIN Page
The Song Mode MAIN Page allows real time recording and playback, song and track selection.
From this page you can view and edit the tracks' channel, program, volume and pan settings, as
well as other useful items.
SongMode:MAIN||Events:317K|||STOPPED||||
CurSong:1|NewSong||||||||||||Tempo:120||
RecTrk|:1||||Vol:127|Pan:64||Mode|:Merge
Program:2|Stereo|Grand|||||||Locat:||1:1
||||||||||||||||||||||||||||||||||||||||
Track||:R|-|-|-|-|-|-|-|-|-|-|-|-|-|-|-|
Channel:1|2|3|4|5|6|7|8|9|10111213141516
Record||Play|||Stop||Erase||MISC||MIXER|
PARAMETER RANGE OF VALUES DEFAULT
CURRENT SONG SONG ID & NAME 1 NEWSONG
RECORD TRACK 1 – 16, NONE, MULT 1
PROGRAM PROGRAM ID & NAME CURRENT PROGRAM
SETUP SETUP ID & NAME CURRENT SETUP
TRACK STATUS - (EMPTY), R, M, P - (EMPTY)
CHANNEL 1 – 16 1 – 16
VOLUME 0 – 127 127
PAN 0 – 127 64
TEMPO 1 – 255 BPM 120 BPM
MODE MERGE, ERASE MERGE
LOCATION 1:1 – 9999:9 1:1
The Events Þeld on the top line displays the amount of free RAM space. 317 K in the above
example represents maximum available memory with P/RAM installed. The maximum is 60 K
without P/RAM. This Þeld is replaced by the Used Þeld, as shown below, when the Song
Status is REC READY or RECORDING, to display the percentage of the record buffer (not the
RAM memory) being used.
SongMode:MAIN||Used:||0%|||REC|READY||
Song Status, also on the top line of the display, will be one of the following:
• STOPPED is displayed whenever the sequencer is not in another status, or when the
Stop or Pause button is pressed.
• PLAYING is displayed when the Play button is pressed (assuming Record has not
been previously pressed; and Key Wait is Off and the Clock set to
Internal)
• REC READY is displayed when the Record button is pressed while the sequencer is
STOPPED. It ßashes, indicating that it is waiting to start recording.
• RECORDING is displayed when the Play button is pressed while REC READY is
ßashing (unless Key Wait is On or the Clock is set to Ext). RECORDING
will also be displayed if the Record button is pressed while the status is
PLAYING.
• KEY WAIT is displayed when the Play button is pressed, if the KeyWait parameter
on the MISC page is set to On. It will go this status from both the
STOPPED and REC READY status. It ßashes, indicating it is waiting for a
key to be struck to start recording or playing.
To Next Page
Loading...
Need help?
General
