KW DAVID 613 - 5 Diagnosis and Fault Handling; I1 Actual Value Menu: Calls for Floor 01 to 16; I2 Actual Value Menu: Calls for Floor 17 to 32; I3-Actual Value Menu Car Position

KW Aufzugstechnik GmbH OPERATING MANUAL DAVID-613
DAVID-D613-V125-E 13.04.2021 Page - 193 -
5.0 Actual value menu, Diagnosis and fault handling
Actual value menu
The new actual menu is the fastest possibility to get informations about lift system “in motion”.
Seven several menus give a comprehensive overview.
The menu switching from normal menu to actual menu takes place via keypress the left key (QUIT-
red) longer than 0.8 seconds.
The return into the normal menu takes place via a short keypress the left key (QIUT- red).
I1-Actual value menu Calls for floors 1 to 16
I1 1.....Calls....16
I: ----------------
A: ----------------
Floor:01 ^ ^ZZ
In this actual menu car calls and priority calls for the floors
1 to 16 are indicated.
In the 4
th
line are indicated the current Stop, the driving di-
rection and information for concisely Up/Down and two
zones.
I2-Actual value menu Calls for floors 17 to 32
I1 17....Calls... 32
I: ----------------
A: ----------------
Floor:01 ^ ^ZZ
In this actual menu car calls and priority calls for the floors
17 to 32 are indicated.
In the 4
th
line are indicated the current Stop, the driving di-
rection and information for concisely Up/Down and two
zones.
I3-Actual value menu Car Position
I3 car: +xxxxxxmm
Conc: +xxxxxmm
<I>
Floor:01 Drive:V
In this actual value menu the current cab position is indi-
cated in mm. The second value indicates the learned con-
cise value in mm.
In the 4
th
line are indicated the current Stop and the driving
direction up and down.