KW DAVID 613 - Page 68

KW Aufzugstechnik GmbH OPERATING MANUAL DAVID-613
DAVID-D613-V125-E 13.04.2021 Page - 68 -
Availability
Less important / Very important
Age 68ft it facilities
< 10 years / > 10 years
Location
Priority-1 / Priority-2 / Priority-3 / Priority 4
Maintenance display line 01
- Travel counter
- Travel counter erasable
- Travel counter up
- Travel counter down
- Change of direction counter
- Power hour meter
- Operating-hours meter
- Operating-hours meter erasable
- Failure hour counter
- Door count T1
- Door count T2
- Door count T3
- Energy reference counter
- Energy feedback meter
- Temperatur D613-ZR
- Max. temperature D613-ZR
- Min. temperature D613-ZR
- Temperature D613-FKR
- Max. temperature D613-FKR
- Min. temperature D613-FKR
- Temperature control cabinet
- Max. temperature control cabinet
- Min. temperature control cabinet
- Temperature pit-brow
- Max. temperature pit-brow
- Min. temperature pit-brow
- Temperature shaft pit
- Max. temperature shaft pit
- Min. temperature shaft pit
- Humidity control cabinet
- Max. humidity control cabinet
- Min. humidity control cabinet
- Humidity pit-brow
- Max. Humidity pit-brow
- Min. Humidity pit-brow
- Humidity shaft pit
- Max. humidity shaft pit
- Min. humidity shaft pit
Maintenance display line 02
- As with display line 01
Maintenance display line 03
- As with display line 01
Maintenance display line 04
- As with display line 01
Maintenance display line 05
- As with display line 01
……
Maintenance display line 21
- As with display line 01
D8-Speed
Speed of the cabin in m/s
Speed of U/min Motor
D9- Safe Copy
Status:
- Normal operation
Relais:
- Sikr*Zone*Door 1:
State bits:
- -**- ---- ---- -**--
Zone
- Length: 400mm
Inspection
- Only speed control monitoring
Monitoring
- Nominal speed: 1,2 m/s
Limit switch
- UP
Limit switch
- DOWN
Delay control
- DOWN
Delay control
- UP
Floors ANTSAFE/LIMAX33CP:
- 04
ANTSAFE-Software:
- CRC: 7950DE2A
- CRC: CE7824DD
LIMAX33CP-Software:
- CRC: 0B55D094