Kyocera ECOSYS FS-1020MFP User Manual

2M4/2M5/2M6/2M7
1-3-14
Detail of Network Status Page
items Description
No. Description Supplement
(1) Machine serial No. -
(2) Firmware version -
(3) Date/ Time 4 in 1 20/21,25/26 ppm model
(4) Engine soft version -
(5) Panel soft version -
(6)
Engine Boot soft version -
(7)
Network Detail -
(8) MAC Address Display MAC Address
(9)
LAN Interface -
(10) Setting Auto,10Base-Half,10Base-Full,100Base-Half,
100Base-Full
(11)
Current The present transmission standard is displayed.
(12)
Raw Port
-
(13)
Status Enabled / Disabled
(14)
LPD -
(15)
Status Enabled / Disabled
(16)
WSD-PRINT -
(17)
Status Enabled / Disabled
(18)
TCP/IP -
(19)
Status Enabled / Disabled
(20)
Printer Host Name KM+Lower 4 figure of a MAC Address
(21)
IPv4 -
(22)
DHCPv4 Status Enabled / Disabled
(23)
IP Address IP address /Not Defined
(24)
Subnet Mask Subnet Mask /Not Defined
(25)
Default Gateway Default Gateway /Not Defined

Kyocera ECOSYS FS-1020MFP Specifications

General

Print Technology	Laser
Print Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Connectivity	USB 2.0
Monthly Duty Cycle	20, 000 pages
Time to First Page	8.5 seconds
Duplex Print Mode	Manual
Scan Type	Flatbed
Output Capacity	100 sheets
Maximum Paper Size	A4
Functions	Print, Copy, Scan
Memory	32 MB
Print Speed	20 ppm
Copy Speed	20 pages per minute
Maximum Scan Area	8.5 x 14 inches
Fax Transmission Speed	Not supported