Kyocera ECOSYS FS-1020MFP User Manual

2M4/2M5/2M6/2M7-1
1-3-18
FAX
Call Set.
FAX call setting
Description
Selects if a fax is to be connected to either a PBX or public switched telephone network.
Access code registration for connection to PSTN.
Purpose
To be executed as required.
Method
1. Enter the Service Setting menu.
2. Select [FAX Call Set.] using the cursor up/down keys.
3. Press the OK key.
Select.
1. Select [Select.] using the cursor up/down keys.
2. Press the OK key.
3. Select [PBX] or [PSTN] using the cursor up/down keys.
4. Press the OK key. The setting is set.
Dial No. to PSTN
1. Select [Dial No. to PSTN] using the cursor up/down keys.
2. Press the OK key.
3. Enter access code using the numeric keys. (0 to 9, 00 to 99)
4. Press the OK key. The setting is set.
items Description
Display Destination
Select. Setting the connection to PBX/PSTN
Dial No. to PSTN Setting access code to PSTN

Kyocera ECOSYS FS-1020MFP Specifications

General

Print Technology	Laser
Print Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Connectivity	USB 2.0
Monthly Duty Cycle	20, 000 pages
Time to First Page	8.5 seconds
Duplex Print Mode	Manual
Scan Type	Flatbed
Output Capacity	100 sheets
Maximum Paper Size	A4
Functions	Print, Copy, Scan
Memory	32 MB
Print Speed	20 ppm
Copy Speed	20 pages per minute
Maximum Scan Area	8.5 x 14 inches
Fax Transmission Speed	Not supported