Kyocera FS-C8500DN Service Manual

1
A
B
C
D
E
F
G
H
付属品
A パンチユニット......................1
B パンチ基板..........................1
C 電線................................1
D パンチくずボックス..................1
E ガイド..............................1
F ビス M4 × 8 タップタイト S ..........1
G ビス M4 × 10 タップタイト S ......... 2
H ラベル .............................1
付属品に固定テープ、緩衝材が付いている場合
は必ず取り外すこと。
Supplied parts
A Hole punch unit........................................ 1
B Punch PCB .............................................. 1
C Power cord .............................................. 1
D Waste hole punch box ............................. 1
E Guide ....................................................... 1
F M4 × 8 tap Tight S screw......................... 1
G M4 × 10 tap Tight S screw ....................... 2
H Label........................................................ 1
Be sure to remove any fixing tapes or cushion-
ing material attached to the supplied parts.
Pièces fournies
A Perforatrice .............................................. 1
B Carte de perforation................................. 1
C Cordon d’alimentation.............................. 1
D Bac de récupération de la perforatrice .... 1
E Guide ....................................................... 1
F Vis S taraudée M4 × 8 ............................. 1
G Vis S taraudée M4 × 10 ........................... 2
H Etiquette................................................... 1
Veiller à retirer toute bande de fixation ou
matériau d’emballage entourant les pièces
fournies.
Partes suministradas
A Perforadora.............................................. 1
B PCB de perforación ................................. 1
C Cable de alimentación ............................. 1
D Caja para desechos de la perforación..... 1
E Guía......................................................... 1
F Tornillo de ajuste M4 × 8.......................... 1
G Tornillo de ajuste M4 × 10........................ 2
H Etiqueta.................................................... 1
Asegúrese de quitar cualquier cinta de fijación
o material de amortiguación colocado en las
partes suministradas.
Gelieferte Teile
A Lochereinheit ........................................... 1
B Locherplatine ........................................... 1
C Netzkabel................................................. 1
D Lochungsabfallbehälter ........................... 1
E Führung ................................................... 1
F M4 × 8 Passstift-Verbundschrauben........ 1
G M4 × 10 Passstift-Verbundschrauben...... 2
H Aufkleber.................................................. 1
Sicherstellen, dass sämtliche Klebebänder
und Dämpfungsmaterialien von den geliefer-
ten Teilen entfernt werden.
Parti fornite
A Unità di perforazione ............................... 1
B
Scheda a circuiti stampati di perforazione .. 1
C Cavo di alimentazione ............................. 1
D Scarto perforazione ................................. 1
E Guida ....................................................... 1
F Viti con testa a croce S M4 × 8................ 1
G Viti con testa a croce S M4 × 10.............. 2
H Etichetta................................................... 1
Assicurarsi di rimuovere qualsiasi nastro ade-
sivo o imbottitura fissati alle parti fornite.
Italiano
Deutsch
Español
Français
English

Kyocera FS-C8500DN Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	600 x 600 DPI
Time to first page (black, normal)	5.2 s
Time to first page (color, normal)	6.7 s
Print speed (black, normal quality, A3)	28 ppm
Print speed (color, normal quality, A3)	25 ppm
Print speed (black, normal quality, A4/US Letter)	55 ppm
Print speed (color, normal quality, A4/US Letter)	50 ppm
Internal memory	1024 MB
Processor model	PowerPC 750GL
Maximum internal memory	2048 MB
Sound power level (standby)	27, 26 dB
Sound pressure level (printing)	55 dB
Total input capacity	- sheets
Total output capacity	500 sheets
Maximum input capacity	100 sheets
Multi-Purpose tray input capacity	4100 sheets
Maximum print size	297 x 420 mm
Paper tray media types	Envelopes, Plain paper
Paper tray media weight	60 - 220 g/m²
Non-ISO print media sizes	Folio (media size), Letter (media size)
ISO A-series sizes (A0...A9)	A3, A4, A5
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A3
Standard interfaces	USB 2.0
USB 2.0 ports quantity	3
Network ready	No
Power requirements	220/240 V, 50/60 Hz
Wireless option type	Wireless LAN (802.11b/g)
Power consumption (active)	1250 W
Compatible operating systems	Windows, Mac OS X 10.2 +, UNIX, LINUX
Maximum duty cycle	150000 pages per month
Recommended duty cycle	25000 pages per month
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	200 W
Power consumption (PowerSave)	15 W
Display	LCD
Certification	GS, TÜV, CE

Weight and Dimensions

Dimensions (WxDxH)	605 x 680 x 691 mm