Kyocera Taskalfa Pro 15000c - Page 102

3-60
Maintenance > Parts Replacement
3
Replace the label (squared in red) that comes with the new
decurler unit according to the region of use, if necessary.
4
Attach decurler unit [A]. Confirm if both triangle marks [B] are
at same position.
5
Close the decurler cover [A].
6
[Home] key > [...] > [Professional Settings] > [U251 Clear
Maintenance Counter].
7
Select [06 Decurl(Op)] > [Start] key.
The counter for replaced part is cleared.
[B]
[A]
[A]