Kyocera Taskalfa Pro 15000c - Paper Cannot be Conveyed to the Stacker

4-63
Troubleshooting > Troubleshooting When Discharging Paper
3
Press the [Start] key > [Stop] key.
Paper cannot be conveyed to the stacker
Depending on the moisture content and type of the paper, the curl direction when discharging changes. Correct the
orientation of the paper according to the curl direction.
1
[Home] key > [...] > [Professional Settings] > [246 Adjust
Finisher] > [04 Stacker1] or [05 Stacker2] > [Air Assist] > [1]
The range of the set value is as follows.
2
Select [Air Ast P(S)] or [Air Ast P(D)].
The range of the set value is as follows.
Tip Stops(5.5x8.5) Adjust the tip stopper position of
5.5" x 8.5" paper.
-30 to +30 0 0.1 mm
Tip Stops(8.5x5.5) Adjust the tip stopper position of
8.5" x 5.5" paper.
-30 to +30 0 0.1 mm
Tip Stops(B5E) Adjust the tip stopper position of
B5E paper.
-30 to +30 0 0.1 mm
Tip Stops(Other) Adjust the tip stopper position of
the other papers.
-30 to +30 0 0.1 mm
SubJogger(A3) Adjust the alignment guide
position of A3 paper.
-30 to +30 0 0.1 mm
SubJogger(B4) Adjust the alignment guide
position of B4 paper.
-30 to +30 0 0.1 mm
SubJogger(11x17) Adjust the alignment guide
position of 11" x 17" paper.
-30 to +30 0 0.1 mm
SubJogger(8.5x14) Adjust the alignment guide
position of 8.5" x 14" paper.
-30 to +30 0 0.1 mm
SubJogger(Other) Adjust the alignment guide
position of the other papers.
-30 to +30 0 0.1 mm
Item Description Range Default
Air Assist Select whether to use the air
assist function.
0: Auto
1: Always use
2: Never use
-
Item Description Range Default Amount of change