4-53
Troubleshooting > Troubleshooting When Feeding Paper
3
Move the feed pressure lever of retard roller to the -20%
position.
4
Close the Front Cover 2.
Paper does not feed
Inkjet paper is fed from the cassette. Adjust the feed pressure of the pickup roller high.
1
Open the Front Cover 2.
When adjusting the feeding pressure of the cassette 4, also open the front cover 4. This
makes it easier to operate the paper feed pressure dial.
• The feed pressure can be adjusted in 4 levels of + 10%, + 20%, Normal Position and
-20%. If you want to increase the paper feed pressure, move the lever downward,
and if you want to lower it, move the lever upward.
• When the feed pressure is low, the paper can be easily separated from the roller
(the separation force is increased). If the feed pressure is high, it will be difficult for
the paper to separate from the roller (the separation force is reduced, and some
paper may be prone to double feed). Adjust the pressure while checking the feeding
condition.
To Next Page
Loading...
