Kyocera Taskalfa Pro 15000c - Troubleshooting When Discharging Paper; The Paper Is Output Laterally from the Right Tray; The Corners of Printouts Are Folded

4-56
Troubleshooting > Troubleshooting When Discharging Paper
Troubleshooting When Discharging Paper
The paper is output laterally from the right tray
The width guide is not properly adjusted according to the paper size. Adjust the width of the paper feed size specified in
the right tray.
1
[Home] key > [...] > [Professional Settings] > [U754 Adjust
Discharge Width] > [01 Width Adj]
2
Adjust the discharge width using the [+], [-] keys and the
numeric keypad > [Start] key > [Stop] key.
The corners of printouts are folded
When the corners of printouts are folded, adjust the air volume of the suction fan according to the type of paper.
1
[Home] key > [...] > [Professional Settings] > [U059 Set Fan
Mode]
2
Select the type of paper
The paper type can be selected from [01 Light], [02 Normal], [03 Heavy], and [04 Envelope].
3
Adjust the discharge width using the [+], [-] keys and the
numeric keypad
The range of the set value is as follows.
4
Press the [Start] key.
Item Range Default Amount of change
01 Light 0 to 70 50 1
02 Normal 0 to 70 39 1
03 Heavy 0 to 70 70 1
04 Envelope 0 to 70 39 1