1-10
Preface > About Maintenance Tools and Cleaning Tools
About Maintenance Tools and Cleaning
Tools
Maintenance Tools
The tools required for maintenance (part replacement) are as follows.
Cleaning Tools
The tools required for cleaning are as follows.
Use our recommended Km towel and deionized water. If you can not get these tools, contact your dealer or service
representative.
Name Purpose of Use
Stubby screw driver Used for screw removal and installation.
Paraffin film Used when placing removed parts etc.
Name Purpose of Use
Stubby screw driver Used for screw removal and installation.
Rubber gloves (powder free) Used to prevent liquid adhesion when replacing the waste ink box or the
head cleaning liquid tank.
Kim towel Used to clean the parts.
Paraffin film Used when placing removed parts etc.
Trash bag Used to discard dirty rubber gloves or Kim towel.
Designated deionized water Used to wipe off ink adhering to parts by applying to Kim towel.
To Next Page
Loading...
