Kyocera Taskalfa Pro 15000c - Smudge or Dirty Paper Edge; Ink Bleed

4-33
Troubleshooting > Troubleshooting When Printing Image
6 Select the color which has clogged nozzles > select [Strong] as the strength of cleaning >
[Start] key.
The head cleaning begins.
7 If the nozzle clog is not solved using head cleaning three times, change the strength of
cleaning to [Ex Strong] and execute cleaning three times.
8 In case that no improvement is observed, contact our service representative.
Smudge or Dirty paper edge
1
Change paper
"Troubleshooting When Printing Image" > "Smudge or Dirty paper edge" (Chapter 19) in
Operation Guide
In case that no improvement is observed, then go to next step.
2
Check media setting
Media Type and Media Weight (Chapter 15) in Operation Guide
In case that no improvement is observed, then go to next step.
3
Paper load check
Loading Paper (Chapter 7) in Operation Guide
In case that no improvement is observed, then go to next step.
4
Check paper
"Troubleshooting When Printing Image" > "Smudge or Dirty paper edge" (Chapter 19) in
Operation Guide
In case that no improvement is observed, then go to next step.
5
Check usage environment
"Troubleshooting When Printing Image" > "Smudge or Dirty paper edge" (Chapter 19) in
Operation Guide
In case that no improvement is observed, then go to next step.
6
Check printouts
High coverage or high ink consumption.
1 Reduce ink consumption with image processing using Fiery Controller.
Printing System 50 user guides
You can download the user guide from the URL below.
https://services.efi.com/support/vfigs/3784295173/default.aspx
2 In case that no improvement is observed, contact our service representative.
Ink bleed