Kyocera Taskalfa Pro 15000c - Page 150

4-47
Troubleshooting > Troubleshooting When Feeding Paper
2 Wipe off ink adhering to the image conveying belt [B], keeping it on Image conveying unit
[A].
3 Rotate belt in the direction of the arrow.
12
Hold handles [B] and [C] put back Image conveying unit [A]
IMPORTANT
When rotating the image conveying belt, do not exceed two revolutions. If the image
conveying belt is turned too much, the belt may meander or break.
[B]
[A]
[A]
[B]
[C]
[C]