15: Updating Firmware
PremierWave® XN Intelligent Gateway User Guide 126
Loading New Firmware through FTP
Firmware may be updated by sending the file to the PremierWave XN intelligent gateway over an
FTP connection. The destination file name on the PremierWave XNunit must have a
"firmware.rom" type of format. The device will reboot upon successful completion of the firmware
upgrade.
Example FTP session:
$ ftp 192.168.10.127
Connected to 192.168.10.127.
220 (vsFTPd 2.0.7)
Name (192.168.10.127:user): admin
331 Please specify the password.
Password:
230 Login successful.
Remote system type is UNIX.
Using binary mode to transfer files.
ftp> put premierwave_xn_8_0_0_0R19
200 PORT command successful. Consider using PASV.
150 Ok to send data.
226 File receive OK.
9308164 bytes sent in 3.05 seconds (3047859 bytes/s)
ftp> quit
221 Goodbye.
To Next Page
Loading...
Need help?
General