PremierWave® XN Intelligent Gateway User Guide 21
3: Installation of the PremierWave XN Device
This chapter describes how to install the PremierWave XN intelligent gateway. It contains the
following sections:
Package Contents
User-Supplied Items
Hardware Components
Wi-Fi Protected Setup (WPS)
Installing the PremierWave XN Device
Package Contents
The PremierWave XN package includes the following items:
PremierWave XN intelligent gateway
RJ-45 Ethernet Straight CAT5 cable, 1.5 meter
Two External antennas
RP with an SMA connector
One Power Supply 12 VDC with international adapters
Mounting components (DIN rail mounting adapter, cover plates, and rubber feet)
PremierWave XN Quick Start Guide
User-Supplied Items
To complete your installation, you need the following items:
RS-232/422/485 serial devices that require network connectivity
-
A serial cable, as listed below, for each serial device. One end of the cable must have a
female DB9 connector for the serial port.
-
A null modem cable to connect the serial port to another DTE device.
-
A straight-through modem cable to connect the serial port to a DCE device.
An available connection to your Ethernet network and an Ethernet cable.
A working AC power outlet if the unit will be powered from an AC outlet using the included 12
VDC power supply
To Next Page
Loading...
Need help?
General