6: Network Settings
PremierWave® XN Intelligent Gateway User Guide 54
Using the CLI
To enter the wlan0 profile advanced command level: enable -> config -> wlan
profiles -> edit <profile name or number> -> advanced
Using XML
Include in your file:
<configgroup name=”wlan profile” instance=”profile name”>
and
<configitem name=”security”>
WLAN Profile Security Settings
The PremierWave XN intelligent gateway supports WEP, WPA, and WPA2/IEEE 802.11i to
secure all wireless communication. WPA and WPA2/IEEE 802.11i are not available for Adhoc
topology.
The WPA2/IEEE 802.11i mode is compliant with the Robust Secure Network specified in the IEEE
standard 802.11i.
Table 6-16 WLAN Profile Security Settings
WLAN Profile
Security Settings
Description
Suite Specify the security suite to be used for this profile.
None = no authentication or encryption method will be used.
WEP = Wired Equivalent Privacy
WPA = Wi-Fi Protected Access
WPA2 /IEEE 802.11i = Robust Secure Network.
Authentication Select the authentication of the security key when the WPA or the WPA2/
IEEE802.11i suite is selected above.
PSK
IEEE 802.1X
- OR -
Select the authentication of the security key when the WEP suite is selected
above.
Open
Shared
Key Type Select the desired key type.
Note: This configuration option becomes available only when suites, WEP, WPA
or WPA2/IEEE 802.11i are selected.
Key Size Select the key size:
40 bits
104 bits
Note: This configuration option becomes available only when the WEP suite is
selected.
To Next Page
Loading...
Need help?
General