16: Network Services
PremierWave® XN Intelligent Gateway User Guide 133
To Configure SNMP Settings
Using Web Manager
To configure SNMP, click SNMP in the menu.
Using the CLI
To enter the SNMP command level: enable -> config -> snmp
Using XML
Include in your file: <configgroup name=”snmp”>
Discovery
The current statistics and configuration options for device discovery, including UPnP query port
are available for the PremierWave XN intelligent gateway.
Table 16-8 Discovery Settings
To Configure Discovery
Note: If you are utilizing Windows XP, make sure to select UPnP User Interface under
Windows Components > Networking Services > Details before setting up the
PremierWave device to utilize Discovery.
Using Web Manager
To access the area with options to configure discovery and view current discovery statistics,
click Discovery in the menu.
Using the CLI
To enter the command level: enable -> config -> discovery
Using XML
Include in your file: <configgroup name=”discovery”>
Discovery Description
Query Port Server
State
Select to enable or disable the query port server from responding to autodiscovery
messages on port 0x77FE.
UPnP Server State Select to enable or disable the UPnP server from discovering devices in Windows
network places.
UPnP Server Port Update the UPnP server port. Leaving this field blank will restore the default
settings.
To Next Page
Loading...
Need help?
General