2: Introduction
PremierWave® XN Intelligent Gateway User Guide 18
Protocol Support
The PremierWave PremierWave XN intelligent gateway contains a full-featured IP networking
stack:
ARP, UDP, TCP, ICMP,DHCP, Auto IP, Telnet, DNS, FTP, TFTP, SSH, SSL and Syslog for
network communications and management.
TCP, UDP, SSH, SSL and telnet tunneling to the serial port.
TFTP for uploading/downloading files.
FTP and HTTP for firmware upgrades and uploading/downloading files.
Troubleshooting Capabilities
The PremierWave XN device server offers a comprehensive diagnostic toolset that lets you
troubleshoot problems quickly and easily. Available from the CLI or Web Manager, the diagnostic
tools let you:
View critical hardware, memory, buffer pool, IP socket information and routing table
Perform ping and traceroute operations
Conduct forward or reverse DNS lookup operations
View all processes currently running on the PremierWave XN intelligent gateway including
CPU utilization
View system log messages
Configuration Methods
After installation, the PremierWave XN unit requires configuration. For the unit to operate correctly
on a network, it must have a unique IP address on the network. There are four basic methods for
logging into the PremierWave XN intelligent gateway and assigning IP addresses and other
configurable settings:
Web Manager: View and configure all settings easily through a web browser using the
Lantronix Web Manager. (See Configuration Using Web Manager on page 33.)
DeviceInstaller: Configure the IP address and related settings and view current settings on
the PremierWave XN intelligent gateway using a Graphical User Interface (GUI) on a PC
attached to a network. You will need the latest version of the Lantronix® DeviceInstaller™
utility. (See Accessing the PremierWave XN Device Using DeviceInstaller on page 31.)
Command Mode: There are a few methods for accessing Command Mode (CLI): making a
Telnet connection, or connecting a PC or other host running a terminal emulation program to
the unit’s port. (See the PremierWave XN Intelligent Gateway Command Reference for
instructions and available commands.)
XML: The PremierWave XN intelligent gateway supports XML-based configuration and setup
records that make device configuration transparent to users and administrators. XML is easily
editable with a standard text or XML editor. (See the PremierWave XN Intelligent Gateway
Command Reference for instructions and commands).
To Next Page
Loading...
Need help?
General