10: Maintenance and Diagnostics Settings
PremierWave® XN Intelligent Gateway User Guide 99
To Perform a Traceroute
Using Web Manager
To perform a Traceroute, click Diagnostics in the menu and select Traceroute.
Using the CLI
To enter the command level: enable, trace route <host>
Using XML
Not applicable.
Log
Table 10-10 Log Settings
To Configure the Diagnostic Log Output
Using Web Manager
To configure the Diagnostic Log output, click Diagnostics in the menu and select Log.
Using the CLI
To enter the command level: enable -> config -> diagnostics -> log
Using XML
Include in your file:
<configgroup name=”diagnostics”>
and
<configitem name=”log”>
Diagnostics: Log Description
Output Select a diagnostic log output type:
Disable - Turn off the logging feature.
Filesystem - Directs logging to /log.txt.
Line (1 or 2 ) - Directs logging to the selected serial line.
Max Length Set the maximum length of the log.txt file in Kbytes.
Note: This setting becomes available when Filesystem is selected.
To Next Page
Loading...
Need help?
General