PLMNL0232 REV. H Effective Date: 01/14/19 59 FiberCUT
®
2D Operation Manual
13 Appendix F – Recommended User-Serviceable Parts List
For recommended user-serviceable spare parts, please call Laser Mechanisms at (248) 474-9480. If your
head requires service beyond the instructions outlined in this manual, please contact Laser Mechanisms for
further assistance.
COLLIMATOR FIXED LENS HOLDERS
Collimator Cartridge 60mm BFL
Collimator Cartridge 100mm BFL
FiberCUT
®
2D Cover Glass Drawer
Cover Glass (Included in Assembly PLFLH0510)
Manifold Seal Ring (Included in Assembly PLFLH0510)
Focus Lens Cartridge 194mm BFL
Focus Lens Cartridge 130mm BFL
Focus Lens Cartridge 150mm BFL
FiberCUT
®
2D Cover Glass Drawer
Cover Glass (Included in Assembly PLFLH0429)
Manifold Seal Ring (Included in Assembly PLFLH0429)
900 – 1100 nm Applications
COLLIMATOR FIXED LENS HOLDERS
Collimator Cartridge 80 EFL
Collimator Cartridge 100 EFL
UPPER COVER GLASS & LOWER COVER GLASS
Focus Lens Cartridge 130 EFL
Focus Lens Cartridge 150 EFL
Control Box Interface Cable (8 m Long)
Control Box Interface Cable (20 m Long)
G1/8 to 6mm Tubing Male Banjo Fitting
G1/8 to 6mm Tubing Male Straight Fitting
G1/8 to 8mm Tubing Male Straight Fitting
Air Blast Output Assembly
Height Sensing Tip Retainer Assembly
Breakaway Insulator (Included in Assembly PLTRA0447)
Outer Hex (Included in Assembly PLTRA0447)
Inner Retainer (Included in Assembly PLTRA0447)
To Next Page
Loading...