1.7 Prohibition of modifications to the device
Any technical modification of the device by the user is prohibited. Any
damage resulting from unauthorized modification is not covered by customer
service or the product warranty. Service work may only be performed by the
LAUDA Service department or a service partner authorized by LAUDA.
1.8 Materials
This section is relevant for:
the Bath thermostat device category
All parts of the device that come into contact with heat transfer liquid are
manufactured from high-quality materials adapted to withstand the oper-
ating temperature. The range of materials used includes high-quality stainless
steels and high-quality, temperature-resistant plastics.
This section is relevant for:
the Circulation thermostat device category
All parts of the device that come into contact with heat transfer liquid are
manufactured from high-quality materials adapted to withstand the oper-
ating temperature. The range of materials used includes high-quality stainless
steels, high-quality, temperature-resistant plastics and brass.
1.9 Fluorinated refrigerant
The cooling thermostats are operated with non-odorized refrigerant (fluori-
nated greenhouse gas), depending on the device model. There are no special
installation requirements due to the low refrigerant charge and hermetically
sealed design. The designation and refrigerant charge are specified on the
rating label.
1.10 Natural refrigerant
Some cooling thermostats are operated with non-odorized natural refrig-
erant, depending on the device model. These refrigerants are combustible.
There are no special installation requirements due to the low refrigerant
charge and hermetically sealed design. The designation and refrigerant
charge are specified on the type plate.
See information Ä Further information on page 31
V6PRO bath thermostats and circulation thermostats10 / 156
To Next Page
Loading...
Need help?
General
