6 Operation
6.1 General safety instructions
WARNING!
Application-specific dangers due to inadvertently confusing the
remote control units for several devices located beside one
another
Scalding, cold burns, fire
Make sure you are using the correct operating unit.
CAUTION!
Contact with hot or cold surfaces
Hot and cold burns
Do not touch the connection nozzle or draining nozzle
during operation.
In addition, the temperature of some bath cover parts may
exceed 70 °C at higher operating temperatures.
The following safety notice is relevant for bath thermostats:
NOTICE!
Risk of remote control unit falling into the bath
Device damage
The remote control unit holder must be attached securely
to the device.
The following safety notices are relevant for circulation thermostats:
DANGER!
Risk of hot heat transfer liquid escaping
Fire
Degas slowly and carefully. Avoid ignition sources in the
vicinity of the filling nozzle and overflow.
V6PRO bath thermostats and circulation thermostats86 / 156
WARNING!
Risk of contact with cold/warm parts if the operator does not
realize that the device is switched on
Scalding, cold burns
The remote control unit must be kept within visual range of
the device.
To Next Page
Loading...
Need help?
General
