Lauda P 10 User Manual

1.4 Observing additional operating instructions
Additional interface modules can be fitted to the device. Before installing
and using interface modules, always read and observe the operating manual
accompanying the relevant interface module.
1.5 Intended use
This section is relevant for:
 the Bath thermostat device category
 The bath thermostat (heating and cooling bath thermostats) may only
be used to control the temperature of flammable and non-flammable
liquids.
 The heating bath thermostat can be operated using the integral cooling
coil. As a result, the heating bath thermostat can be used to cool fluids.
 The thermostat may only be operated with an approved country-specific
mains plug for the power supply.
The following types of use are considered unintended:
 Use as a medical device
 Use in potentially explosive areas
 Use for controlling the temperature of foodstus
This section is relevant for:
 the Circulation thermostat device category
 The circulation thermostat may only be used to recirculate and control
the temperature of flammable and non-flammable heat transfer liquids.
The heat transfer liquid is pumped through an external circuit with a
closed consumer unit and then back into the thermostat.
 The thermostat may only be operated with an approved country-specific
mains plug for the power supply.
The following types of use are considered unintended:
 Use as a medical device
 Use in potentially explosive areas
 Use for controlling the temperature of foodstus
 Use with a glass reactor without overpressure protection
1.6 Foreseeable misuse
The following are considered cases of foreseeable misuse:
 Operating the device without heat transfer liquid
 Connecting hoses incorrectly
 Setting an incorrect pump pressure
Interface modules
As intended
Unintended
As intended
Unintended
V6 PRO bath thermostats and circulation thermostats 9 / 156

Lauda P 10 Specifications

General

Brand	Lauda
Model	P 10
Category	Thermostat
Language	English