Lauda P 10 User Manual

Please also note the following:
 The device may only be moved after it has been drained. For this pur-
pose, the device must be decommissioned.
6.2 Operating modes
The device supports two operating modes.
 In Operation mode, the components of the device are operational.
 In Standby
mode, all device component are switched o. Power is only
supplied to the display on the device. This operating mode is suitable for
adjusting multiple settings, for example.
A program that has been started is paused in Standby mode. After
activating Operation mode, the program must be resumed again man-
ually. Ä Chapter 6.4 “Activating and deactivating standby and operation
modes” on page 88
6.3 Setting the pump level
There are several pump levels for regulating the pumps of the bath and
circulating thermostats. The dierent pump levels optimize bath circulation,
output, conveyance pressure, noise emissions and mechanical heat input.
Ä Chapter 3.3.1 “Hydraulic circuit” on page 21
A pump level of 1 to 3 is appropriate for a small bath thermo-
stat without an external consuming unit. A higher output level is
appropriate for the circulation thermostat, in order to minimize the
temperature dierence between the bath and external consuming
unit.
1. Open the Home window.
2. Touch the [Pump] tile.

The [Pump level] and [Filling mode] buttons are displayed in the
submenu. Filling mode is only available for the circulation thermo-
stat.
3. Touch the [Minus] or [Plus] button on the [Pump level] button. Touch
the [Plus] button to increase the pump speed.
The selected pump level is activated automatically. It does
not have to be activated separately.
4. Press the [<] button to return to the home window.
6.4 Activating and deactivating standby and operation modes
In standby mode, device components such as the pump are switched o. The
display remains active, however. Standby mode is ideal for adjusting multiple
settings using the operating unit.
1. Open the Home window.
Fig. 50: Pump tile
V6PRO bath thermostats and circulation thermostats88 / 156

Lauda P 10 Specifications

General

Brand	Lauda
Model	P 10
Category	Thermostat
Language	English