LAUNCH X-431 PAD III User Manual
40
On-screen Buttons:
Testable models:
Tap to view the vehicle models that the current diagnostic
software covers.
Update instruction:
Tap to view the optimized items and enhancements.
Software introduction:
Tap to check the software function list.
Note:
Tap to read some precautions on using the current diagnostic software.
Search Bluetooth:
Tap to search for the available VCI Bluetooth connector.
*Notes:
•
No Bluetooth connection is required for DEMO program.
•
If a vehicle is tested and no Bluetooth connection is made before diagnosis, tap
“Search Bluetooth”, a dialog box similar to the following appears:
Fig. 5-16
Tap “Scan” to start searching for the VCI connector. Once it is found, tap it to start
pairing.
If the X-431 PAD III handset has paired with the VCI connector, it will enter Step 2
directly.
Confirm:
Tap it to go to next step.
2). Select test item: Select the desired test item to proceed.
To Next Page
Loading...
Need help?
General
