Leica DVM6 User Manual Service 56
Care, Maintenance, Contact Persons (Continued)
Cleaning polymer components
Some components are made of polymer or are
polymer-coated. They are, therefore, pleasant
and convenient to handle. The use of unsuit-
able cleaning agents and techniques can
damage polymers.
Permitted measures
O Clean the microscope (or parts of it)
using warm soapy water, then wipe using
distilled water.
O Remove dust with a bellows and a soft
paintbrush.
O Clean the objectives with special optics
cleaning cloths and a commercially avail-
able glass cleaner.
Servicing
O Repairs may only be carried out by Leica
Microsystems-trained service technicians.
Only original Leica Microsystems spare
parts may be used.
Danger of electric shock
Risk of electric shock. Removing the
cover of the LeicaDVM6 exposes elec-
trically live parts, which, if touched, can cause
potentially fatal injuries. Have technical service
carried out by a Leica Microsystems authorized
dealer.
To Next Page
Loading...
