X75HD Installation and Operation Manual xi
Preface
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Preventing Electrostatic Discharge
CAUTION: Electrostatic discharge (ESD) can damage components
in the product. To prevent ESD, observe these precautions when
directed:
• Use a ground strap. Wear a grounded wrist strap to discharge
the static voltage from your body while installing or removing
sensitive components.
• Use a safe work area. Do not use any devices capable of
generating or holding a static charge in the work area where you
install or remove sensitive components. Avoid handling sensitive
components in areas that have a floor or benchtop surface
capable of generating a static charge.
• Handle components carefully. Do not slide sensitive
components over any surface. Do not touch exposed connector
pins. Handle sensitive components as little as possible.
• Transport and store carefully. Transport and store sensitive
components in a static-protected bag or container.
For Products with Multiple Power Cords:
WARNING: To reduce the risk of electric shock, plug each power
cord into separate branch circuits employing separate service
grounds.
CAUTION: This unit can have more than one power supply cord.
To de-energize the internal circuitry, disconnect all power cords
before servicing.
Norway:
ADVARSEL: Utstyret kan ha mere ennn en tilførselsledning. For å
gjore interne deler spennigsløse må alle tilførselsledningene trekkes
ut.
Sweden:
VARNING: Denna apparat har mer än en nätanslutning. Samtliga
nätkablar måste bortkopplas för att göra de interna kretsarna
spänningsfria.
CAUTION: To completely disconnect this equipment from the AC
Mains, disconnect the power supply cord plug from the AC
receptacle.
CAUTION: Do not expose this equipment to dripping or splashing
and ensure that no objects filled with liquids, such as vases, are
placed on the equipment.
To Next Page
