Leitch X75HD - Typical Control Configurations

20 X75HD Installation and Operation Manual
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Chapter 1: Introduction
Typical Control Configurations
The X75HD can be configured, controlled, and monitored using the
following methods:
• Local control panel on X75HD (see the Control Panels for X75
Systems Installation and Operation Manual for details)
• Separate remote control panel such as the RCP-X75 (see the
Control Panels for X75 Systems Installation and Operation Manual
for details)
• Web browser program such as Internet Explorer™ (IE) or
Netscape™ (see “Configuring for HTTP Control
(via Web Browser)” on page 76 or “Chapter 9: Controlling the
X75HD via Web Server Software” for details)
All remote methods of operation are done via an RJ-45 Ethernet
connection to an X75HD. See Figure 1-9 on page 21 for an illustration
of these various control configurations.
Note
The maximum recommended
length for a standard
10/100Base-T cable is 382 ft
(100 m).