176 X75HD Installation and Operation Manual
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Appendix B: Troubleshooting
Recalling the Unique IP Address for a System
If you cannot remember the set IP address for you system, you have
several options:
• Navigate to the Setup menu on your local control panel to discover
the IP address of your X75HD system.
• Connect your RCP-X75 remote panel to the X75HD system, and
navigate to the Setup menu to discover the IP address.
• If you do not have a local or remote panel with a VFD screen for
viewing your IP address, you can reset the X75HD to its default IP
address and then reconfigure the address using your Web browser
software. To do this, follow these steps:
a. Push the DEF IP DIP switch on the back on the unit to the
down position.
This resets the IP address of the system to its default address.
(System IP: 192.168.100.250; Subnet mask: 255.255.255.0;
Gateway: 192.168.100.250.) The Machine Name will not
change.
b. Launch your X75 Web server software, and navigate to the
Setup menu.
c. Set a unique IP address for your system.
d. Return the DEF IP DIP switch to the up position, and then
reboot the system.
To Next Page
