X75HD Installation and Operation Manual 65
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Chapter 5
Initial Configuration
Overview
This chapter describes the various configurations and settings that are
required before you begin operating the X75HD. Although you can
modify all parameters and settings at any point during operation, there
are certain control options and configurations that you need to set first,
including those listed below:
• “Initial Power-Up and Control Steps” on page 66
• “Configuring Network Settings” on page 68
• “Remotely Controlling X75HD Systems” on page 73
• “Configuring for HTTP Control (via Web Browser)” on page 76
• “Understanding X75HD Processing Modes” on page 77
• “Configuring Video” on page 81
• “Configuring Audio” on page 83
This chapter briefly outlines the configurations you are required to
make. Unless otherwise specified, directions are given for making these
changes via the control panel only.
For more details on using local and remote control panels, navigating
the menus, and changing parameter options, see the Control Panels for
X75 Systems Installation and Operation Manual.
To Next Page
Loading...
