Leitch X75HD - Configuring Network Settings

68 X75HD Installation and Operation Manual
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Chapter 5: Initial Configuration
Configuring Network Settings
When shipped, the X75HD is configured with a default IP address
along with other network settings. If you intend to control the unit
remotely or connect it to a network hub/switch along with other X75HD
units, you will need to reconfigure the IP with unique network settings.
Local control (with a direct connection to a PC) does not require any IP
configuration.
Supported Network Protocols
The X75HD supports various network protocols for remote/network
control:
• EP (for example, using an RCP-X75 remote control panel).
See “Remotely Controlling X75HD Systems” on page 73 for
details.
• HTTP (for example, using a MS Internet Explorer 6.0).
See “Configuring for HTTP Control (via Web Browser)” for
details.