Lenovo Flex System Fabric CN4093 User Manual

© Copyright Lenovo 2017 Chapter 9: Ports and Link Aggregation (LAG) 169
Usethefollowingcommandtocheckwhethertheportsareaggregated.
StaticLAGsarelistedasLAGs 1though52.DynamicLAGsarelistedas65through
128.
LACP individual
PortsassignedwithanLACPadminkeyarepreventedbydefaultfromforming
individuallinksiftheycannotjoinaLACPLAG.Tooverridethisbehavior,usethe
followingcommands:
Thisallowstheselectedportstobetreatedasnormallink‐upports,whichmay
forwarddatatrafficaccordingtoSTP,
HotLinksorotherapplications,iftheydo
notreceiveanyLACPDUs.
ToconfiguretheLACPindividualsettingforalltheportsinastaticLACPLAG,
usethefollowingcommands:
Note: Bydefault,portsareconfiguredasbelow:
 externalportswithlacp suspend-individual
 internalportswithno lacp suspend-individual
CN 4093 # show lacp information
CN 4093(config)# interface port <portaliasornumber>
CN 4093(config-if)# no lacp suspend-individual
CN 4093(config-if)# interface portchannel lacp <LAGadminkey>
CN 4093(config-if)# [no] lacp suspend-individual

Lenovo Flex System Fabric CN4093 Specifications

General

Brand	Lenovo
Model	Flex System Fabric CN4093
Category	Switch
Language	English