Parameter setting with the XT EMZ9371BC keypad
Menu structure
9
Parameter setting
9.4
9.4.8
L
9.4-15
EDS82EV903-1.0-11/2002
Main menu DescriptionSubmenus
No.
Description
DisplayNo.Display
Active only in basic controllers as from software version 2.2:
Change to the code level to display the levels at the terminals. The levels of analog inputs
and output s are evaluated with offset and gain.
10.13 Monit AIN1 Level at analog input 1
0 ... 100 % (re f e re nce C0034)
10.14 Monit AIN2 Level at analog input 2
0 ... 100 % (re f e re nce C0034)
10.15 Monit AOUT1 Level at analog output 1
0 ... 100 %
(Reference standard-I/O: 10 V)
(Reference application-I/O: C0424)
10.16 Monit AOUT2 Level at analog output 2
0 ... 100 % (re f e re nce C0424)
10.17 Monit PTC Status of PTC input
0
≡ open, 1 ≡ closed
10.18 Monit DIGIN Status of digital inputs and input for controller inhibit X3/28
0
≡ LOW, 1 ≡ HIGH
10.19 Monit DIGOUT Status of digital outputs and status of normally-open contact
of relay outputs:
0
≡ LOW, 1 ≡ HIGH
11 LECOM/AIF Configuration of operation with communication modules
11.1 LECOM setup Serial interface
11.2 AIF setup Process data
11.3 Status words Display of status words
12 FIF system bus Configuration of operation with function module system
bus (CAN) and display of the contents of the CAN objects
Only active with function module system bus (CAN)
12.1 CA N managem CAN communication parameters
12.2 Cfg CAN-IN1
12.3 Cfg CAN-OUT1
C
Nob
ect 1
12.4 Cfg CAN-IN2
12.5 Cfg CAN-OUT2
C
Nob
ect 2
12.6 Status words Display of status words
12.7 CAN diagn CAN diagnosis
Active only in basic controllers as from software version 2.2:
Change to the code level to display the content of the data words. The contents of the data
words are displayed.
12.8 Mon IN1 W1-2 Content of 4 input words or 4 output words of CAN object 1
12.9 Mon IN1 W3-4
Analog words: 5DC0h ≡ 480 Hz
12.10 Mon OUT1 W1-2
Digital words: Hexadecimal representation of the individual
12.11 Mon OUT1 W3-4
bits
12.12 Mon IN2 W1-2 Content of 4 input words or 4 output words of CAN object 2
12.13 Mon IN2 W3-4
Analog words: 5DC0h ≡ 480 Hz
12.14 Mon OUT2 W1-2
Digital words: Hexadecimal representation of the individual
12.15 Mon OUT2 W3-4
bits