Lenze E84AYCER - Page 94

Lenze · E84AYCER communication module (PROFINET) · EDS84AYCER EN 3.0 - 02/2019 94
Parameter reference
Parameters of the communication module
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C13900
C13901
C13902
C13910
C13911
C13912
Parameter | Name:
C13900 | Firmware product type
Data type: VISIBLE_STRING
Index: 10675
d
= 29B3
h
The code contains a string with a length of 8 characters.
The "E84DFYER" identification code is output.
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT
Parameter | Name:
C13901 | Firmware compilation date
Data type: VISIBLE_STRING
Index: 10674
d
= 29B2
h
The code contains a string with a length of 20 characters.
The creation date ("MMM DD YYYY") and time ("hh:mm:ss") of the software are displayed, e.g. "Mar 21 2005
12:31:21".
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT
Parameter | Name:
C13902 | Firmware version
Data type: VISIBLE_STRING
Index: 10673
d
= 29B1
h
The code contains a string with a length of 11 characters.
The identification code is displayed (e.g. "01.00.00.00").
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT
Parameter | Name:
C13910 | I&M1 System designation
Data type: VISIBLE_STRING
Index: 10665
d
= 29A9
h
Input/output of the I&M1 plant identification code
• The Lenze setting shows an empty string.
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT
Parameter | Name:
C13911 | I&M1 Installation site
Data type: VISIBLE_STRING
Index: 10664
d
= 29A8
h
Input/output of the I&M1 location identification code
• The Lenze setting shows an empty string.
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT
Parameter | Name:
C13912 | I&M2 Installation date
Data type: VISIBLE_STRING
Index: 10663
d
= 29A7
h
Input/output of the I&M2 date of installation
• The Lenze setting shows an empty string.
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT