Menu item Description
Collation
On
Off
Stacks the pages of a print job in sequence when printing multiple copies
Notes:
• Off is the factory default setting. No pages will be collated.
• The On setting stacks the print job sequentially.
• Both settings print the entire job the number of times specified by the Copy
menu setting.
Separator Sheets
None
Between Copies
Between Jobs
Between Pages
Specifies whether blank separator sheets are inserted
Notes:
• None is the factory default setting.
• Between Copies inserts a blank sheet between each copy of a print job if
Collation is set to On. If Collation is set to Off, a blank page is inserted
between each set of printed pages, such as after all page 1's, all page 2's,
and so on.
• Between Jobs inserts a blank sheet between print jobs.
• Between Pages inserts a blank sheet between each page of the print job.
This setting is useful when printing transparencies or inserting blank pages
in a document for notes.
Separator Source
Tray <x>
MP Feeder
Specifies the paper source for separator sheets
Notes:
• Tray 1 (standard tray) is the factory default setting.
• From the Paper menu, Configure MP must be set to Cassette in order for
MP Feeder to appear as a menu setting.
Multipage Print
Off
2 Up
3 Up
4 Up
6 Up
9 Up
12 Up
16 Up
Specifies that multiple-page images be printed on one side of a sheet of paper.
This is also referred to as N-up or Paper Saver.
Notes:
• Off is the factory default setting.
• The number selected is the number of page images that will print per side.
Multipage Order
Horizontal
Vertical
Reverse Horizontal
Reverse Vertical
Specifies the positioning of multiple-page images when using Multipage Print
Notes:
• Horizontal is the factory default setting.
• Positioning depends on the number of images and whether the images are
in portrait or landscape orientation.
162
To Next Page
Loading...
Need help?
General
