Lexmark E320 - Page 238

I-10 Service Manual
4500
reset
defaults (E320/E322)
3-13
operator panel
3-19
user defaults (E320/E322)
2-100
RIP connectors (E220/E321/E323)
5-7
RIP connectors (E320/E322)
5-6
S
safety information 1-xvii
service checks
controller card (E220/E321/E323)
2-67
cooling fan (E220/E321/E323)
2-66
cooling fan (E320/E322)
2-65
cover interlock (E220/E321/E323)
2-70
cover interlock (E320/E322)
2-69
dead machine
2-71
engine board (E320/E322)
2-72
fuser
2-74
cold fuser
2-64
hot fuser
2-76
LVPS power supply
2-76
main motor
2-77
operator panel
2-79
operator panel button
2-78
paper feed
2-81
paper jam during POST
2-81
paper jam-registration roll
2-84
paper never picks
2-83
paper picks but stops
2-82
paper picks during POST
2-81
paper picks sheets
2-83
paper skews
2-84
paper trees, curls
2-84
parallel port
2-85
print quality
2-86
image density
2-89
light print
2-90
partial blank image
2-89
poor fusing of image
2-90
toner on back of page
2-91
white or black lines
2-91
transfer roll
2-99
service error codes
2-11, 2-45
controller card error
2-55
controller software error
2-45
controller software/illegal trap
2-45
engine circuitry error
2-53
engine flash error
2-46
engine software error
2-46
fan stalled error
2-49
fuser error
2-48
network error
2-57
NVRAM failure
2-54
paper communication failure
2-58
primary
2-8
ASIC register failure
2-20
ASIC SRAM failure
2-21
base memory
2-18
conditions not reported
2-24
engine failure
2-24
errors not reported
2-24
flash memory failure
2-22
font checksum failure
2-23
fuser failure-over temp.
2-12
fuser failure-printing
2-13
fuser failure-standby
2-13
fuser failure-under temp.
2-12
fuser-thermistor open
2-14
mirror motor failure
2-15
NVRAM failure
2-19
optional memory
2-16
ROM checksum failure
2-17
printhead error
2-50
RAM memory error
2-56
RIP to engine error
2-51, 2-52
secondary
2-9
software
2-11
subcode
2-10
toner sensor error
2-49
transfer roll error
2-47
transport motor error
2-51
service error secondary lights
2-43
service information lights
2-42