Lexmark T650 - Tools Required

1-8 Service Manual
4062-XXX
The finisher supports 60-176 g/m2 (16-47 lb) paper weights.
Tools required
Flat-blade screwdrivers, various sizes
#1 Phillips screwdriver, magnetic
#2 Phillips screwdriver, magnetic
#2 Phillips screwdriver, magnetic short-blade
7/32 inch (5.5 mm) open-end wrench
7.0 mm nut driver
Needle nose pliers
Diagonal side cutters
Spring hook
Analog or digital multimeter
Flash light (optional)
Paper type
Standard exit bin
(350 or 550 sheets)
Optional hardware
Output
Expander (550
sheets) or High
Capacity
Output stacker
(1850 sheets)
5-Bin Mailbox
(500 sheets)
1
StapleSmart II
Finisher
(500 sheets)
2
Paper
•Plain
•Bond
• Colored
•Custom
• Letterhead
•Light
• Heavy
•Preprinted
• Rough/Cotton
• Recycled
xxxx
Card stock xx
Envelopes
Labels
1
xx
Transparencies xx
1
Supports 60-90 g/m2 (16-24 lb) paper weights.
2
Maximum of 50 sheets of 75 g/m2 (20 lb) paper per stapled packet. Results may vary with heavier
paper.