Lexmark T650 - Access Door Removal (T650, T652, T654); Alignment Assembly Removal (T650, T652, T654)

4-8 Service Manual
4062-XXX
Access door removal (T650, T652, T654)
1. Open the access door.
2. Gently detach the two hinges (A) of the access door from the machine.
3. Remove the access door.
Alignment assembly removal (T650, T652, T654)
WARNING: When replacing the alignment assembly, ensure that the media skew is properly adjusted using
the adjuster screw (C), or jamming will occur. Go to “Alignment assembly adjustment” on page 4-4.
1. Remove the side cover, left. Go to “MPF cam gear removal (T650, T652, T654)” on page 4-37 or “Side
cover, left removal (T652 and T654)” on page 4-66.
2. Remove the six screws (A) securing the metal cover to the machine.
A
A