Lexmark T650 - Operator Panel Cover Latch Assembly Removal (Models X651, X652, X654, and X656); Option Drive Shaft Removal (T650, T652, T654)

4-52 Service Manual
4062-XXX
Operator panel cover latch assembly removal (models X651, X652, X654, and X656)
1. Lift the operator panel cover assembly.
2. Remove the ten screws (A) securing the operator panel cover latch assembly to the operator panel cover
assembly.
3. Remove the operator panel cover latch assembly.
Option drive shaft removal (T650, T652, T654)
1. Gently place the printer on its left or right side.
2. Using pliers, gently pull the option drive shaft from the machine.