Lexmark T650 - Charge Roll Assembly Removal (T650, T652, T654)

4-14 Service Manual
4062-XXX
Charge roll assembly removal (T650, T652, T654)
WARNING: When removing the charge roll assembly, avoid touching the charge roll surface.
1. Open the MPF door assembly.
2. Open the operator panel front cover assembly.
3. Detach the left side of the charge roll assembly from the machine.
4. Detach the right side of the charge roll assembly from the machine.
5. Remove the charge roll assembly.
Replacement Warning: When replacing the charge roll assembly, avoid touching the charge roll surface.